LGD incl. Power Station
LGD A52CS - EURO 7
Stand-Alone Laserdiod-Detector NH3 / H2O 1Hz with power station
Features and description:
- heated sampling system with integrated self-priming membrane pump and filter
- measuring component ammonia gas with customized ranges up to 3000 ppm
- purge of gas cell with N2 or ambient air at standby, flow <0.5 l/min
- continuous heated sampling system up to 190 °C
- self-priming pump with rotation speed control; flow range up to 6 l/min
- heated filtration with glass fiber surface, without hang-up-effect
- integrated pressure regulator for high inlet pressure up to 3 bar (6764-00847)
- all parts with contact to the sample gas are made of passivated stainless steel, PFA and FPM to reduce hang-up effects
- no compressed air necessary by using a membrane pump
- manifold applications: test bench (230 VAC), mobile operation on the street (24 VDC), combinable with existing PEMS
- integrated temperature controller for internal oven and heated line (24 V)
- cross-sensitivity to H2O included, no other cross-sensitivities, measured values long-term stable
- T23 OLED Display with touch key integrated
- integrated zero gas and span gas valve unit for automatic adjustment
- quality checks in touch with XCU (External Check Unit) and qbookStudio
Technical data:
- compact design: 19“/2, depth 400 mm, 4 RU
- measure component: NH3 and H2O, sample flow: 1..5 l/min, sampling rate: 1 Hz
- cell volume: 15 ml (1 Hz at 0,9 l/min, 3 Hz at 2,7 l/min, 10 Hz at 9 l/min)
- accuracy NH3: <2 % rel. deviation at measuring point
- lower detection limit: 0.5 ppm, repeatability: <0.35 % at measuring point
- drift: <1,5 % of range per 24 hours (range 100 ppm or higher)
- linearity: <2 % at measuring point, cross-sensitivity: <2 % at measuring point to H2O, no other cross-sensitivities
- response time T90: 2..3 sec dependent on flow; laser path length: 400 mm
- interfaces: CAN (dbc, INCA, CANalyzer, Vector) and LAN (AK)
- test gas and zero gas inlets with Quick Connect plugs, internal valve switching
- power supply: 22…28 VDC or 115 / 230 VAC, uninterruptible change between 24 V and 230 V
- power consumption: typical 120 VA, weight: 13.5 kg
BAT A27CS, LGD Power Station
- Mobile transport case with laptop holder and batteries
- to accommodate an LGD (version A52CS for correlations, LGD not included)
- 2 long-lasting and safer Li-Ion cells including protective electronics (overcharging, deep discharging, short circuit protection and temperature monitoring of the batteries)
- Capacity 2x 750 WH (1500 Wh)
- Working voltage battery 21.0 .. 29.4 V
- Charging with external charging power supply (separately)
- additional connections for consumers via USB-C (max. 100W)